Gears & Toothed Parts
| Spur Gears Brass and Steel Spur Gears 38-171 Teeth. 38DP Tooth Profile. For standard 4.06mm and stainless triflat axles. Reproduction and Pre-Owned Original Meccano. |
|
| Pinions Brass and Steel Pinions 7-30 Teeth. ⅛" to ¾" Face width. 38DP Tooth Profile. For standard 4.06mm and stainless triflat axles. Reproduction and Pre-Owned Original Meccano. |
|
| Worm & Contrate Gears Brass Worm and Contrate Gears. Short, Standard, Left Hand and Narrow Worms. Contrate Gears with 19, 25 and 50 Teeth. For standard 4.06mm and stainless triflat axles. Reproduction and Pre-Owned Original Meccano. |
|
| Bevel Gears Brass Bevel Gears. 90 Degree drive with two 45 Degree gears or Special Pairs. A variety of ratios from 1:1 to 3:1. Reproduction and Pre-Owned Original Meccano. |
|
| Helical Gears Helical Gears. 10 to 60 Teeth Mesh together at 90 Degrees, or use a LH and RH Gear to Mesh in parallel. Reproduction and Pre-Owned Original Meccano. |
|
| Rack Strips and Gear Rings Black and Nickel Finish Rack Strips. 7-25 Hole. Gear Rings from 57 internal and 133 external teeth to 133 internal and 171 external teeth. All standard Meccano 38DP tooth profile. Reproduction and Pre-Owned Original Meccano. |
|
| Large Toothed Parts (16DP & 30DP) Large Toothed Gears, both 16DP and 30DP tooth profiles. The 30DP gears mesh with a total of 60 teeth for every 1" pitch. Large Toothed Quadrant. Reproduction and Pre-Owned Original Meccano. |
|
| Plastic Gears Plastic Meccano Gears. Spur and Pinions, Contrate and Worm Gears. Rack Strips. Multipurpose Gears. Reproduction and Pre-Owned Original Meccano. |
